Reversing the KL audio delay bypass mod
Some of the KLs I've got have had the audio delay circuit in the receiver bypassed. This audio delay is what makes the KL have the nice silent mute action.…
Some of the KLs I've got have had the audio delay circuit in the receiver bypassed. This audio delay is what makes the KL have the nice silent mute action.…
The KL150 I took from my stock for the new VK7RVP 2m repeater seemed to be in good condition, until I tested it. As usual, the low power mods were performed, channel…
A short pictorial demonstrating modifications to the Sanwu SW-HF07 USB sound adapter for use with VKLink nodes. A search on eBay finds what appears to be a suitable CM108 based USB…
On Tuesday 22/12/15 4 persons made the trip to St Valentines Peak. Those persons being Graeme and John Rand, the helicopter pilot David, and myself. The purpose of the trip…
Borrowing the idea from the NHRC-3.1 CTCSS mod I decided to do the same for the VK5DJ controller. The same idea applies, but with a slightly different interface. We take the mute…
Today we demonstrate how to mod a C1000 CTCSS encoder to follow the receiver mute on a NHRC-3.1 controlled repeater with noise and CTCSS mute options. Break the track between pins…
I'm a great fan of the NHRC-Squelch board, and the additional squelch performance it provides over the standard KL mute. This is how I install them, they fit nicely into the PLL…
My favourite site. Soon to get a 6 metre repeater. I envisage a flowerpot type antenna will get mounted above the UHF 4 stack array on the stand off. Repeater will be…
In this post we describe how to modify the Unilab KL series of repeaters for low idle current for use at solar powered sites, where efficiency is important.. Essentially we…