VK7RTC gets a power upgrade, hopefully a coverage one soon
On Friday 23rd, I travelled up to Mt.Wellington to do a power upgrade in the form of a battery install. A switch mode 40A power supply had been used since…
0 Comments
October 26, 2015
VK7RHF 10M repeater project
For a couple of years now I have been contemplating putting in a 10M repeater in Hobart for use when the band is open and to encourage more activity on…
October 20, 2015
NHRC-Squelch into KL RX Module
I'm a great fan of the NHRC-Squelch board, and the additional squelch performance it provides over the standard KL mute. This is how I install them, they fit nicely into the PLL…
September 10, 2015
St Valentines Peak – VK7RVP
My favourite site. Soon to get a 6 metre repeater. I envisage a flowerpot type antenna will get mounted above the UHF 4 stack array on the stand off. Repeater will be…
September 9, 2015
Unilab KL Low Idle Power Mods
In this post we describe how to modify the Unilab KL series of repeaters for low idle current for use at solar powered sites, where efficiency is important.. Essentially we…
September 9, 2015