2m KL150 PA repair
The KL150 I took from my stock for the new VK7RVP 2m repeater seemed to be in good condition, until I tested it. As usual, the low power mods were performed, channel…
0 Comments
April 18, 2023
Converting the Hamtronics R303 to frequency agile
The Hamtronics R303 can be ordered with up to 4 frequencies programmed, which are selectable with jumpers. When I ordered my R303, I had ordered CCARC frequencies to be programmed. Now that…
July 19, 2016
7DB mod for 5DJ CTCSS Encode
Borrowing the idea from the NHRC-3.1 CTCSS mod I decided to do the same for the VK5DJ controller. The same idea applies, but with a slightly different interface. We take the mute…
December 21, 2015
7DB mod for CTCSS encode following mute on NHRC-3.1
Today we demonstrate how to mod a C1000 CTCSS encoder to follow the receiver mute on a NHRC-3.1 controlled repeater with noise and CTCSS mute options. Break the track between pins…
November 17, 2015
St Valentines Peak – VK7RVP
My favourite site. Soon to get a 6 metre repeater. I envisage a flowerpot type antenna will get mounted above the UHF 4 stack array on the stand off. Repeater will be…
September 9, 2015